Steps to Follow

How do I check for a leak?
1. Turn off all faucets inside and outside. Make sure that your dishwasher, washing machine, toilets,     etc. are not running.
2. Record your meter reading on the water meter located outside your home (usually on a front corner     of your property). While recording your reading, you can also check the dial located in the middle of     your meter that resembles a pinwheel. If you see that your pinwheel dial is moving, you can     assume you have a leak. If the pinwheel dial is not moving, proceed to Step 3.
3. Wait 2 to 6 hours using absolutely no water. (Remember not to flush any toilets during this time.)
4. Record your meter reading again and compare the two readings.
5. If the reading has increased, you may have a leak, and you may want to contact a licensed plumber     or repair the leak yourself.
6. If the reading is the same, you do not have a leak.

leak adjustment request form

For more information on how to read your meter, click here